A modular gravity conveyor system with snag-free, precision rolled side frames and stands to add on as required. How to order: 1. Please state roller diameter, width and pitch plus track length. 2. Track lengths are priced per 1500mm length (3m = maximum length for an individual section). 3. If more than one run is required, please specify the make up of each run & include sketch if possible. 4. Each overall length of track should be divisible by the roller pitch - length supplied will be rounded up to the nearest pitch multiple. 5. For conveyor stands and other accessories - see opposite page. NB: Additional track widths are available on request.

TRACK
• Precision rolled steel side frame, powder coated.
• No projecting spindles.
• Track width is the roller width plus approximately 80mm.
• Side frame is punched on 25mm centres to allow for future pitch adjustment.
ROLLERS
• Bright zinc plated rollers with hexagonal spindles.
• Spring loaded for easy assembly/removal.
• Rollers should normally be 50mm wider than the article being conveyed.
ROLLER PITCH
• As a guide, for rigid based items, a minimum of 3 rollers should support the article to be conveyed. Softer based products need more supporting rollers or a slave board.
ROLLERS
• Capacities shown are for evenly distributed loads.
• Roller capacity = weight of the load + number of rollers in contact with the load.
STANDS
• Supplied as an extra.